Item Tag: Carbide

Supercut 93 1/2-inch x 1/2-inch x .025 x 3 TPI Carbide Infused (Made in USA)

The Premium Gold Carbide Impregnated Resaw Blade was designed with the professional and serious woodworker in mind. It is truly a unique blade featuring many new advances in blade design. Made from the toughest alloys, the teeth are precision ground and razor sharp, not punched or milled like traditional blades. During the manufacture of this blade, the teeth are impregnated with Carbide particles which greatly improve the cutting life of the blade. The teeth also feature a new aggressive tooth design and set yet, the sides of the blade are polished smooth, and the back of the blade is smoothed to allow it to feed and turn with less heat and chatter. This blade is manufactured to the industry’s highest standards. No less than 30 inspections and tests ensure that this is the best blade for the refined woodworker. Packaged in a carefully designed container to ensure safety and maintain sharpness and of course, it also carries our LIMITED LIFETIME WELD WARRANTY on every weld.

What is this compatible with?
Grizzly G0555LX Deluxe Band Saw, 14 , JET JWBS-14DXPRO 14-Inch Deluxe, Delta 28-400 14 in. 1 HP Steel Frame Band Saw, PORTER-CABLE 13.625-in 10-Amp Stationary Band Saw Item # 78159,Grizzly G0555X – 14″ Extreme Series Band Saw, Shop Fox Band Saw — 14in., Model# W1706, and many others.

What material can it cut?
– Wood

LIMITED LIFETIME WELD WARRANTY
SuperCut Band Saw guarantees the welds on all of our band saw blades which prove to be defective in material or workmanship upon examination, will be repaired or replaced without charge provided that the purchaser returns the product (together with sales receipt showing place and date of purchase) to our factory. 100% MADE IN THE USA – Not made anywhere else but the USA.100% LIMITED LIFETIME WELD WARRANTY – Premium Gold Carbide Teeth Blade built with Impregnated Teeth not just a Carbide Tip, and the toughest alloys to retain sharpness for improved cutting life then fused by our superior weld.LESS HEAT & CHATTER – Aggressive alternate hook tCLEAN CUTS – Precision ground, razor sharp teeth, polished back and sides for reduced friction and the cleanest cuts possible.MINIMAL WASTE – The best blade for the serious woodworker cutting exotic woods, where waste is not an option.

5 PCS 1/4″ 4 FLUTE CARBIDE END MILL – TiALN COATED

Lot of 5 PCS1/4″ 4 Flute SE RegularSolid Carbide End Mill Flutes: 4Diameter: 1/4″Length of Cut: 3/4″Shank Diameter: 1/4″Overall Length: 2-1/2″Finish: TiALNCenter Cutting: YesOur part number: 412500-C3 Buy with confidence. Made in USA using premium carbide on our CNC grinders. Manufacturer direct pricing. Free shipping on orders over $250.

New 5 PCS – 1/4″ 4 FLUTE CARBIDE END MILL – TiALN COATED USA

Lot of 5 PCS 1/4″ 4 Flute SE Stub Solid Carbide End Mill Flutes: 4 Diameter: 1/4″ Length of Cut: 0.7″ Shank Diameter: 1/4″ Overall Length: 50mm Finish: TiALN Center Cutting: Yes Buy with confidence. Made in USA using premium carbide on our CNC grinders. Manufacturer direct pricing. On Sep 4, 2024 at 06:55:54 PDT, seller added the following information:

(5) 1/16″ (.0625″) CARBIDE END MILL 2 FLUTE KYOCERA 1600.0625.250

100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Use the shopping cart feature to combine all your items into one order, with one shipping charge. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. MADE IN USA For sale are FIVE 1/16″ (.0625″) new two-flute, solid carbide endmills. These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market and are made in the USA. They have a flute length of (.250”), and can be used for your plastic, soft media, wood, or metal (such as aluminum or copper) milling. part number: 1600.0625.250 diameter size # flutes length of cut shank OAL end-style .0625″ 1/16″ 2 .250″ .125” 1.5” center-cut Each tool has a collet locating ring for identification and quick change depth control. Kyocera Tycom products are manufactured with the finest carbide grades available. As a result, Kyocera Tycom applies the latest developments in material science to the design and manufacture of precision cutting tools. You’ll not find a better endmill at this price. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is for 5 endmills. Sign up for my email newsletters by adding my eBay Store to your Favorites SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail – includes 50 pack storage box INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED delivery time varies by destination – 1st class mail – priority mail small flat rate box – priority mail standard – includes tracking number – express mail – includes tracking number Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!

1/2″ 5 FLUTE CARBIDE END MILL – SQUARE END – AlCrN COATED

1/2″ 5 FLUTE SOLID CARBIDE END MILLVARIABLE GEOMETRYAlCrN COATEDSQUARE END1-1/4″ LENGTH OF CUT3″ OVERALL LENGTH1/2″ SHANK DIAMETER High performance endmills at manufacturer direct pricing. Buy with confidence. Made in USAusing premium 10% cobalt micrograinmaterial on our CNC grinders. Whypay more for a brand name? Our endmills are as good or better at much lower prices. Free shipping on orders over $250.

5 PCS 1/2″ 4 FLUTE CARBIDE END MILL – REGULAR LENGTH

Lot of 5 PCS1/2″ 4 Flute SE RegularSolid Carbide End Mill Flutes: 4Diameter: 1/2″Length of Cut: 1″Shank Diameter: 1/2″Overall Length: 3″Finish: BrightCenter Cutting: YesOur part number: 415000 Buy with confidence. Made in USA using premium carbide on our CNC grinders. Manufacturer direct pricing. Combine items to lower shipping cost.Free shipping for orders over $250.