Galvanized Steel Wire Rope 7×7 Strand 3/16″-1/4″ Clear Vinyl Coated 1ft – 300ft
BIDDING OPTIONSCable OnlyOne Loop with Aluminum Sleeve AttachedTwo Loops with Aluminum Sleeve Attached to both endsCut to specified lengthCable Description Galvanized steel cables are flexible, durable, have moderate resistance to corrosion and good for weather resistance. These cables are customized cut to order and may tailor to any project that requires a specific length. Cable Specification3/16″ Core Diameter 1/4″ Clear Vinyl Coated Overall DiameterGalvanized Steel7x7 Braid ConstructionCable Breaking Strength: 3700 lbsLoop Breaking Strength: N/APlease Note: Cable Breaking Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed the recommended design factor or 1/7 of catalog cable breaking strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. Cable breaking strength is not considered safe working load limit. •••DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED••• Do not use cable breaking strength for design or rating purposes. Use working load limit instead. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. PLEASE SEE ALL CABLES WITH VARIOUS SPECIFICATIONS by PHAT SATELLITE INTL SEARCH ON EBAY FOR PHAT SATELLITE INTL IMPORTANT INFORMATIONDisclaimer: Weights and figures are for reference only. Consultation of an independent engineer or other qualified persons for your usage is highly recommended. Breaking strength provided for anodized are approximate only. Information on anodized should only be used as a guide; information may vary according to manufacturing specifications, and usage applications. Check tensile strength (Grade) and MBS (Minimum Breaking Strain) at time of order and receiving of the order to confirm appropriateness of information, and before product usage or application. Additional sizes of anodized of commercial rigging fittings and sleeves are not rated and must not be used for any tensioning, suspension, load-bearing/lifting applications, or other purposes subject to control by statutory requirements. Rigging screws are batch tested only. Lifting applications require an individual certificate of proof test to be supplied by qualified professional and or organization for your specific usage applications. Hardware chain and braided cables of commercial quality is suitable for general use only. Not suitable for lifting, suspension, under load, or any application subject to control by statutory authorities/requirements. SHIPPING & HANDLING All orders are shipped within one business day. At our discretion, your order will be ship with USPS, FEDEX, UPS, DHL, or freight trucking services. Tracking information is available and gladly sent via email within one day of shipping. If the tracking number is not received, please check your “junk” and “spam” folders before contacting us. Please see the shipping options available at checkout. For Expedited services or special handling request, please call us directly between 12noon and 5pm Pacific time. AFO/APO/Military and Alaska/Hawaii/Puerto Rico, please select either USPS Parcel or Priority Shipping. We cannot ship using the other methods to your location. We will only ship to Paypal confirmed addresses. WARRANTY & RETURNS Due to customization and safety risks this item cannot be returned. * Item may vary slightly from image posted above. Due to unforeseen variances in the manufacturer’s production processes, so items may appear different from that posted in the auction. Be assured that all items are of the same specifications and of the same high quality.
Red Vinyl Coated Galvanized Steel Utility Cable 1/8 – 3/16, 7×19, 1 – 70 ft Coil
Cable Description Galvanized steel cables are flexible, durable, have moderate resistance to corrosion and good for weather resistance. These cables are customized cut to order and may tailor to any project that requires a specific length. Cable Specification3/16″ Red Vinyl Coated Overall Diameter1/8″ Core Diameter Galvanized Steel7x19 Strand ConstructionCable Breaking Strength: 2000 lbsLoop Breaking Strength: N/AOther UsageHanging Christmas Lights, Decoration, Home DecorDo it yourself projects, clothes line, Fencing, Marine, Agriculture, Commercial Usage Please Note: Cable Breaking Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed the recommended design factor or 1/7 of catalog cable breaking strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. Cable breaking strength is not considered safe working load limit. •••DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED••• Do not use cable breaking strength for design or rating purposes. Use working load limit instead. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. PLEASE SEE ALL CABLES WITH VARIOUS SPECIFICATIONS by PHAT SATELLITE INTL SEARCH ON AMAZON FOR PHAT SATELLITE INTL IMPORTANT INFORMATION Disclaimer: Weights and figures are for reference only. Consultation of an independent engineer or other qualified persons for your usage is highly recommended. Breaking strength provided for anodized are approximate only. Information on anodized should only be used as a guide; information may vary according to manufacturing specifications, and usage applications. Check tensile strength (Grade) and MBS (Minimum Breaking Strain) at time of order and receiving of the order to confirm appropriateness of information, and before product usage or application. Additional sizes of anodized of commercial rigging fittings and sleeves are not rated and must not be used for any tensioning, suspension, load-bearing/lifting applications, or other purposes subject to control by statutory requirements. Rigging screws are batch tested only. Lifting applications require an individual certificate of proof test to be supplied by qualified professional and or organization for your specific usage applications. Hardware chain and braided cables of commercial quality is suitable for general use only. Not suitable for lifting, suspension, under load, or any application subject to control by statutory authorities/requirements. SHIPPING & HANDLING All orders are shipped within one business day. At our discretion, your order will be ship with USPS, FEDEX, UPS, DHL, or freight trucking services. Tracking information is available and gladly sent via email within one day of shipping. If the tracking number is not received, please check your “junk” and “spam” folders before contacting us. Please see the shipping options available at checkout. For Expedited services or special handling request, please call us directly between 12noon and 5pm Pacific time. AFO/APO/Military and Alaska/Hawaii/Puerto Rico, please select either USPS Parcel or Priority Shipping. We cannot ship using the other methods to your location. We will only ship to Paypal confirmed addresses.WARRANTY & RETURNS Due to customization and safety risks, this item cannot be returned. We will exchange all DOA items free of charge, but the purchaser is responsible for shipping the item back to us. All warranties are through the manufacturer. Please check the make and model of your intended item through the manufacturer for further warranty information. * Item may vary slightly from image posted above. Due to unforeseen variances in the manufacturer’s production processes, so items may appear different from that posted in the auction. Be assured that all items are of the same specifications and of the same high quality.
Red Vinyl Coated Galvanized Steel Utility Cable 1/8 – 3/16, 7×19, 1 – 70 ft Coil
Cable Description Galvanized steel cables are flexible, durable, have moderate resistance to corrosion and good for weather resistance. These cables are customized cut to order and may tailor to any project that requires a specific length. Cable Specification3/16″ Red Vinyl Coated Overall Diameter1/8″ Core Diameter Galvanized Steel7x19 Strand ConstructionCable Breaking Strength: 2000 lbsLoop Breaking Strength: N/AOther UsageHanging Christmas Lights, Decoration, Home DecorDo it yourself projects, clothes line, Fencing, Marine, Agriculture, Commercial Usage Please Note: Cable Breaking Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed the recommended design factor or 1/7 of catalog cable breaking strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. Cable breaking strength is not considered safe working load limit. •••DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED••• Do not use cable breaking strength for design or rating purposes. Use working load limit instead. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. PLEASE SEE ALL CABLES WITH VARIOUS SPECIFICATIONS by PHAT SATELLITE INTL SEARCH ON AMAZON FOR PHAT SATELLITE INTL IMPORTANT INFORMATION Disclaimer: Weights and figures are for reference only. Consultation of an independent engineer or other qualified persons for your usage is highly recommended. Breaking strength provided for anodized are approximate only. Information on anodized should only be used as a guide; information may vary according to manufacturing specifications, and usage applications. Check tensile strength (Grade) and MBS (Minimum Breaking Strain) at time of order and receiving of the order to confirm appropriateness of information, and before product usage or application. Additional sizes of anodized of commercial rigging fittings and sleeves are not rated and must not be used for any tensioning, suspension, load-bearing/lifting applications, or other purposes subject to control by statutory requirements. Rigging screws are batch tested only. Lifting applications require an individual certificate of proof test to be supplied by qualified professional and or organization for your specific usage applications. Hardware chain and braided cables of commercial quality is suitable for general use only. Not suitable for lifting, suspension, under load, or any application subject to control by statutory authorities/requirements. SHIPPING & HANDLING All orders are shipped within one business day. At our discretion, your order will be ship with USPS, FEDEX, UPS, DHL, or freight trucking services. Tracking information is available and gladly sent via email within one day of shipping. If the tracking number is not received, please check your “junk” and “spam” folders before contacting us. Please see the shipping options available at checkout. For Expedited services or special handling request, please call us directly between 12noon and 5pm Pacific time. AFO/APO/Military and Alaska/Hawaii/Puerto Rico, please select either USPS Parcel or Priority Shipping. We cannot ship using the other methods to your location. We will only ship to Paypal confirmed addresses.WARRANTY & RETURNS Due to customization and safety risks, this item cannot be returned. We will exchange all DOA items free of charge, but the purchaser is responsible for shipping the item back to us. All warranties are through the manufacturer. Please check the make and model of your intended item through the manufacturer for further warranty information. * Item may vary slightly from image posted above. Due to unforeseen variances in the manufacturer’s production processes, so items may appear different from that posted in the auction. Be assured that all items are of the same specifications and of the same high quality.
1/4″ COATED GALVANIZED STEEL CABLE ALUMINUM SLEEVE, 1-75ft Clear, Yellow, White
CABLE SPECIFICATION1-75 feet, Vinyl Coated Galvanized Steel Cable WireJacket Color: Clear, Yellow, WhiteOuter Diameter: 1/4 inches with coatingCore Diameter: 3/16 inches galvanized steelMaximum Tensile Strength: 3700 lbsRefers to federal RR-W-410H specificationCable End Configuration: Looped on both ends with aluminum sleeve *** Length indicated on this listing is measured from the end of the loop(s) *** IMPORTANT INFORMATION Maximum Tensile Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed recommended design factor or 12% of maximum tensile strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. maximum tensile strength is not considered safe working load limit. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. We recommend buyer to consult with a licensed engineer for proper usage safety. ***DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED*** Working Load Limit (WLL) – The Working Load Limit is the maximum load which should ever be applied to the cable, even when new or when the load is evenly distributed – straight line pull only. Avoid side loading. All ratings are based upon regular environmental conditions; conditions; attention must be given to unusual conditions such as severe temperature, chemical solutions or vapors, prolonged immersion in salt water, etc. Proof Test Load (Proof Load) – The term Proof Test assigns a quality control test applied to the product for exclusive function of exposing flaws in material or build. The Proof Test Load (normally 2x the WLL) is load which the cable underwent & sustained without malformation when new and under laboratory test conditions. The Proof Test Load does not mean that the WLL should ever be exceeded.Breaking Strength – Breaking Strength is the average force at which the wire rope, in the condition it would leave the factory, has been found by representative testing to break, when a constantly increasing force is applied in direct line to the product at a uniform rate of speed on a stander pull testing machine. Proof testing to twice the WLL does not apply to hand-spiced slings. Remember: Breaking Strength, when published, where obtained under controlled laboratory conditions. Listing the Breaking Strength does not mean the Working Load Limit should ever be exceeded. Do not use breaking strength as a criterion for ser vice or design purposes. Refer to the Working Load Limit instead.Design Factor – An industry term usually computed by dividing the Breaking Strength by the WLL and generally expressed as a ration (ex: 7:1).Shock Load – A load resulting from rapid change of movement, such as impacting, jerking or swinging of a stack load. Sudden release of tension is another form of shock loading. Shock loads are generally significantly greater than static loads. Any shock loading must be considered when selecting the item for use in a system. Avoid shock loads as they may exceed the Working Load Limit.
1/4″ COATED GALVANIZED STEEL CABLE ALUMINUM SLEEVE, 1-75ft Clear, Yellow, White
CABLE SPECIFICATION1-75 feet, Vinyl Coated Galvanized Steel Cable WireJacket Color: Clear, Yellow, WhiteOuter Diameter: 1/4 inches with coatingCore Diameter: 3/16 inches galvanized steelMaximum Tensile Strength: 3700 lbsRefers to federal RR-W-410H specificationCable End Configuration: Looped on both ends with aluminum sleeve *** Length indicated on this listing is measured from the end of the loop(s) *** IMPORTANT INFORMATION Maximum Tensile Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed recommended design factor or 12% of maximum tensile strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. maximum tensile strength is not considered safe working load limit. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. We recommend buyer to consult with a licensed engineer for proper usage safety. ***DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED*** Working Load Limit (WLL) – The Working Load Limit is the maximum load which should ever be applied to the cable, even when new or when the load is evenly distributed – straight line pull only. Avoid side loading. All ratings are based upon regular environmental conditions; conditions; attention must be given to unusual conditions such as severe temperature, chemical solutions or vapors, prolonged immersion in salt water, etc. Proof Test Load (Proof Load) – The term Proof Test assigns a quality control test applied to the product for exclusive function of exposing flaws in material or build. The Proof Test Load (normally 2x the WLL) is load which the cable underwent & sustained without malformation when new and under laboratory test conditions. The Proof Test Load does not mean that the WLL should ever be exceeded.Breaking Strength – Breaking Strength is the average force at which the wire rope, in the condition it would leave the factory, has been found by representative testing to break, when a constantly increasing force is applied in direct line to the product at a uniform rate of speed on a stander pull testing machine. Proof testing to twice the WLL does not apply to hand-spiced slings. Remember: Breaking Strength, when published, where obtained under controlled laboratory conditions. Listing the Breaking Strength does not mean the Working Load Limit should ever be exceeded. Do not use breaking strength as a criterion for ser vice or design purposes. Refer to the Working Load Limit instead.Design Factor – An industry term usually computed by dividing the Breaking Strength by the WLL and generally expressed as a ration (ex: 7:1).Shock Load – A load resulting from rapid change of movement, such as impacting, jerking or swinging of a stack load. Sudden release of tension is another form of shock loading. Shock loads are generally significantly greater than static loads. Any shock loading must be considered when selecting the item for use in a system. Avoid shock loads as they may exceed the Working Load Limit.
3/16″ COATED PVC GALVANIZED STEEL CABLE METAL WIRE ROPE 1ft-75ft (Clear, Yellow)
CABLE SPECIFICATION1-75 feet, Vinyl Coated Galvanized Steel Cable WireJacket Color: Clear, YellowOuter Diameter: 3/16 inches with coatingCore Diameter: 1/8 inches galvanized steelMaximum Tensile Strength: 1700 lbsRefers to federal RR-W-410H specificationCable End Configuration: Looped on both ends with aluminum sleeve*** Length indicated on this listing is measured from the end of the loop(s) ***IMPORTANT INFORMATIONMaximum Tensile Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed recommended design factor or 12% of maximum tensile strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. maximum tensile strength is not considered safe working load limit. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. We recommend buyer to consult with a licensed engineer for proper usage safety.***DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED***Working Load Limit (WLL) – The Working Load Limit is the maximum load which should ever be applied to the cable, even when new or when the load is evenly distributed – straight line pull only. Avoid side loading. All ratings are based upon regular environmental conditions; conditions; attention must be given to unusual conditions such as severe temperature, chemical solutions or vapors, prolonged immersion in salt water, etc. Proof Test Load (Proof Load) – The term Proof Test assigns a quality control test applied to the product for exclusive function of exposing flaws in material or build. The Proof Test Load (normally 2x the WLL) is load which the cable underwent & sustained without malformation when new and under laboratory test conditions. The Proof Test Load does not mean that the WLL should ever be exceeded.Breaking Strength – Breaking Strength is the average force at which the wire rope, in the condition it would leave the factory, has been found by representative testing to break, when a constantly increasing force is applied in direct line to the product at a uniform rate of speed on a stander pull testing machine. Proof testing to twice the WLL does not apply to hand-spiced slings. Remember: Breaking Strength, when published, where obtained under controlled laboratory conditions. Listing the Breaking Strength does not mean the Working Load Limit should ever be exceeded. Do not use breaking strength as a criterion for ser vice or design purposes. Refer to the Working Load Limit instead.Design Factor – An industry term usually computed by dividing the Breaking Strength by the WLL and generally expressed as a ration (ex: 7:1).Shock Load – A load resulting from rapid change of movement, such as impacting, jerking or swinging of a stack load. Sudden release of tension is another form of shock loading. Shock loads are generally significantly greater than static loads. Any shock loading must be considered when selecting the item for use in a system. Avoid shock loads as they may exceed the Working Load Limit.
3/16″ COATED PVC GALVANIZED STEEL CABLE METAL WIRE ROPE 1ft-75ft (Clear, Yellow)
CABLE SPECIFICATION1-75 feet, Vinyl Coated Galvanized Steel Cable WireJacket Color: Clear, YellowOuter Diameter: 3/16 inches with coatingCore Diameter: 1/8 inches galvanized steelMaximum Tensile Strength: 1700 lbsRefers to federal RR-W-410H specificationCable End Configuration: Looped on both ends with aluminum sleeve*** Length indicated on this listing is measured from the end of the loop(s) ***IMPORTANT INFORMATIONMaximum Tensile Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed recommended design factor or 12% of maximum tensile strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. maximum tensile strength is not considered safe working load limit. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. We recommend buyer to consult with a licensed engineer for proper usage safety.***DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED***Working Load Limit (WLL) – The Working Load Limit is the maximum load which should ever be applied to the cable, even when new or when the load is evenly distributed – straight line pull only. Avoid side loading. All ratings are based upon regular environmental conditions; conditions; attention must be given to unusual conditions such as severe temperature, chemical solutions or vapors, prolonged immersion in salt water, etc. Proof Test Load (Proof Load) – The term Proof Test assigns a quality control test applied to the product for exclusive function of exposing flaws in material or build. The Proof Test Load (normally 2x the WLL) is load which the cable underwent & sustained without malformation when new and under laboratory test conditions. The Proof Test Load does not mean that the WLL should ever be exceeded.Breaking Strength – Breaking Strength is the average force at which the wire rope, in the condition it would leave the factory, has been found by representative testing to break, when a constantly increasing force is applied in direct line to the product at a uniform rate of speed on a stander pull testing machine. Proof testing to twice the WLL does not apply to hand-spiced slings. Remember: Breaking Strength, when published, where obtained under controlled laboratory conditions. Listing the Breaking Strength does not mean the Working Load Limit should ever be exceeded. Do not use breaking strength as a criterion for ser vice or design purposes. Refer to the Working Load Limit instead.Design Factor – An industry term usually computed by dividing the Breaking Strength by the WLL and generally expressed as a ration (ex: 7:1).Shock Load – A load resulting from rapid change of movement, such as impacting, jerking or swinging of a stack load. Sudden release of tension is another form of shock loading. Shock loads are generally significantly greater than static loads. Any shock loading must be considered when selecting the item for use in a system. Avoid shock loads as they may exceed the Working Load Limit.
1ft – 70ft Galvanized Steel 3/16″ – 1/4″ Vinyl Coat Wire Rope Cable 7×19 strand
Wire rope, also called wire cable, is an assembly of wire strands formed hectically around a center core. The construction includes 7 strands and 19 wires per strand in galvanized steel resulting in a small diameter that is both flexible and offers resistance to corrosion. Note: Breaking strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed the recommended design factor or 1/7 of catalog breaking strength. These cables are not designed for overhead lifting or aircraft use.GALVANIZED STEEL CABLE OPTIONSBoth Ends of the Cable Wire are Looped and Crimped with Aluminum SleeveOne End of the Cable Wire are Looped and Crimped with Aluminum SleeveOption for Cable OnlyCustom Cut to Order 1 foot – 70 feetCABLE SPECIFICATION3/16″ Center Core Diameter Coated to 1/4″ Overall DiameterGalvanized SteelPVC ClearCable Breaking Strength: 4200lbsLoop breaking strength: N/A•••DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED••• Do not use breaking strength for design or rating purposes. Use working load limit instead. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. PLEASE SEE ALL CABLES WITH VARIOUS SPECIFICATIONS by PHAT SATELLITE INTL SEARCH ON EBAY FOR PHAT SATELLITE INTL IMPORTANT INFORMATIONLegal Disclaimer: Weights and figures are for reference only. Consultation of an independent engineer or other qualified persons for your usage is highly recommended. Breaking strength provided for wire rope are approximate only. Information on wire rope should only be used as a guide; information may vary according to manufacturing specifications, and usage applications. Check tensile strength (Grade) and MBS (Minimum Breaking Strain) at time of order and receiving of the order to confirm appropriateness of information, and before product usage or application. Additional sizes of wire rope of commercial rigging fittings and sleeves are not rated and must not be used for any tensioning, suspension, load-bearing/lifting applications, or other purposes subject to control by statutory requirements. Rigging screws are batch tested only. Lifting applications require an individual certificate of proof test to be supplied by qualified professional and or organization for your specific usage applications. Hardware chain and braided cables of commercial quality is suitable for general use only. Not suitable for lifting, suspension, under load, or any application subject to control by statutory authorities/requirements.
1ft – 70ft Galvanized Steel 3/16″ – 1/4″ Vinyl Coat Wire Rope Cable 7×19 strand
Wire rope, also called wire cable, is an assembly of wire strands formed hectically around a center core. The construction includes 7 strands and 19 wires per strand in galvanized steel resulting in a small diameter that is both flexible and offers resistance to corrosion. Note: Breaking strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed the recommended design factor or 1/7 of catalog breaking strength. These cables are not designed for overhead lifting or aircraft use.GALVANIZED STEEL CABLE OPTIONSBoth Ends of the Cable Wire are Looped and Crimped with Aluminum SleeveOne End of the Cable Wire are Looped and Crimped with Aluminum SleeveOption for Cable OnlyCustom Cut to Order 1 foot – 70 feetCABLE SPECIFICATION3/16″ Center Core Diameter Coated to 1/4″ Overall DiameterGalvanized SteelPVC ClearCable Breaking Strength: 4200lbsLoop breaking strength: N/A•••DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED••• Do not use breaking strength for design or rating purposes. Use working load limit instead. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. PLEASE SEE ALL CABLES WITH VARIOUS SPECIFICATIONS by PHAT SATELLITE INTL SEARCH ON EBAY FOR PHAT SATELLITE INTL IMPORTANT INFORMATIONLegal Disclaimer: Weights and figures are for reference only. Consultation of an independent engineer or other qualified persons for your usage is highly recommended. Breaking strength provided for wire rope are approximate only. Information on wire rope should only be used as a guide; information may vary according to manufacturing specifications, and usage applications. Check tensile strength (Grade) and MBS (Minimum Breaking Strain) at time of order and receiving of the order to confirm appropriateness of information, and before product usage or application. Additional sizes of wire rope of commercial rigging fittings and sleeves are not rated and must not be used for any tensioning, suspension, load-bearing/lifting applications, or other purposes subject to control by statutory requirements. Rigging screws are batch tested only. Lifting applications require an individual certificate of proof test to be supplied by qualified professional and or organization for your specific usage applications. Hardware chain and braided cables of commercial quality is suitable for general use only. Not suitable for lifting, suspension, under load, or any application subject to control by statutory authorities/requirements.
1ft-300ft Galvanized Steel 1/16″ – 1/8″ Vinyl Coated Cable Wire Rope 7×7 strand
BIDDING OPTIONS One Loop with Aluminum Sleeve Two Loops with Aluminum Sleeves Cable Only Cut to Specified LengthCABLE SPECIFICATION1/16″ Core Diameter 1/8″ Clear Vinyl Coated Overall DiameterGalvanized Steelcable breaking strength: 480lbsloop breaking strength: N/APlease Note: Cable breaking strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed the recommended design factor or 6:1 and 3:1 depending on application. These cables are not designed for overhead lifting or aircraft use. •••DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED••• Do not use cable breaking strength for design or rating purposes. Use working load limit instead. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use.IMPORTANT INFORMATION Disclaimer: Weights and figures are for reference only. Consultation of an independent engineer or other qualified persons for your usage is highly recommended. Breaking strength provided for anodized are approximate only. Information on anodized should only be used as a guide; information may vary according to manufacturing specifications, and usage applications. Check tensile strength (Grade) and MBS (Minimum Breaking Strain) at time of order and receiving of the order to confirm appropriateness of information, and before product usage or application. Additional sizes of anodized of commercial rigging fittings and sleeves are not rated and must not be used for any tensioning, suspension, load-bearing/lifting applications, or other purposes subject to control by statutory requirements. Rigging screws are batch tested only. Lifting applications require an individual certificate of proof test to be supplied by qualified professional and or organization for your specific usage applications. Hardware chain and braided cables of commercial quality is suitable for general use only. Not suitable for lifting, suspension, under load, or any application subject to control by statutory authorities/requirements. SHIPPING & HANDLING All orders are shipped within one business day. At our discretion, your order will be ship with USPS, FEDEX, UPS, DHL, or freight trucking services. Tracking information is available and gladly sent via email within one day of shipping. If the tracking number is not received, please check your “junk” and “spam” folders before contacting us. Please see the shipping options available at checkout. For Expedited services or special handling request, please call us directly between 12noon and 5pm Pacific time. AFO/APO/Military and Alaska/Hawaii/Puerto Rico, please select either USPS Parcel or Priority Shipping. We cannot ship using the other methods to your location. We will only ship to Paypal confirmed addresses.WARRANTY & RETURNS Due to customization and safety risks this item cannot be returned. * Item may vary slightly from image posted above. Due to unforeseen variances in the manufacturer’s production processes, so items may appear different from that posted in the auction. Be assured that all items are of the same specifications and of the same high quality.